The Golden Band. On Your Bench.
ㅤ
Hardware remains the biggest bottleneck in 6G FR3 research, often requiring costly equipment overhauls. TMYTEK bridges this gap by directly connecting your sub-6 GHz SDRs to 7.125–8.3 GHz. Protect your existing investments while unlocking immediate access to end-to-end FR3 validation today.
FR3's Standards Are Being Written Today.
Shape Them with Real Data.
The Golden Band (7.125–8.3 GHz) anchors 6G upper mid-band research. TMYTEK provides field-ready hardware to run real trials,
validate algorithms, and help shape the 3GPP standard today.
7.125–8.3 GHz
ITU-identified candidate band spanning the Americas & most of Asia-Pacific
Rel-19 → Rel-21
3GPP’s active timeline for standardizing FR3 channel models
Field Trials Ready
Field trials and spectrum studies now underway across multiple regions in parallel
Shared Spectrum
Defense satellite links and radar backhaul already operate in this band today
Accelerate 6G standardization with real data. Drive 3GPP channel modeling and algorithm proposals through field-proven FR3 measurements today.
A Proven Research Platform,
Ready for FR3 & 6G Research OTA Validation.
Seamless SDR & USRP Integration
UD Box 0630 connects directly to existing SDRs and USRPs, extending them into the 6G upper mid-band (FR3) without replacing existing equipment.
Real-Time Control for Algorithm Validation
BBox Lite FR3 enables ±40° beam steering and ≤2 μs SPI beam switching through a unified API for real-time ISAC, radar, and beamforming research.
Scalable Hardware for Wide-Area Testing
Scale from a single bench to wide-area testing with BBox Lite FR3’s detachable arrays and XRifle RIS’s λ/4 bezel design for continuous panel tiling.
Proven Platform, Familiar Workflow
Built on the same TMXLAB Kit GUI and Python API proven across TMYTEK’s FR2 deployments, enabling faster setup with a familiar workflow.
A Modular Ecosystem for
End-to-End FR3 Research.
Phased Array Beamforming
BBox Lite FR3
- Configurable 1×4, 4×1, or 2×2 active subarrays
- ≤2 μs beam switching via SPI
- Scalable up to a 4×4 active-array setup
Dynamic Reconfigurable Reflection
XRifle Dynamic RIS FR3
- 7.125–8.4 GHz, 16×16 array with 1-bit phase control
- <10 μs beam switching
- Supports ±60° incident and reflection angle
Turn Your SDR into an FR3 SDR
UD Box 0630
- 6–30 GHz RF range with 1–8 GHz IF
- Dual-channel bi-directional up/down conversion
- Built-in LO with 10/100 MHz reference and LO synchronization
One Platform Across Every
6G Research Domain.
FR3 Channel & Algorithm Research
Validate upper-mid-band beamforming/channel control; what the kit is built for first.
ISAC & Radar Algorithm Validation
One active array covers both communication and sensing roles.
SATCOM Waveform Validation
X-band/LEO-adjacent waveforms via UD Box 0630's 6–30 GHz range.
NLoS Channel-Control Validation
Programmable reflection around blockage, tested before field deployment.
2026 Q4
Engineering Samples Ready
Preliminary timeline; feasibility and specifications remain subject to validation and change.
FAQ
Shape the Future of FR3 with Us.
Interested in algorithm validation, engineering samples, or a technical deep-dive?
Talk to your TMYTEK representative.
Request Early Access
Leave your email and a TMYTEK representative will follow up about early access to the 6G FR3 Platform.
Download Product Brief
Download Product Brief